Resin patios and paths
Resin Driveways Norwich lays resin patios and garden paths for homes in Norwich and across Norfolk, using the same smooth, porous stone finish as a resin bound driveway.
What resin patios and paths are
Resin is not only for driveways. The same resin bound finish works well for front paths, garden paths, patios, seating areas and the strip around a house. Because it is trowelled smooth it is comfortable underfoot and easy for wheels, from wheelbarrows and bikes to pushchairs and wheelchairs.
A path or patio carries far less weight than a drive, so the base can be built to suit foot traffic, though it still needs to be solid and stable. On a porous base, rain drains through instead of pooling, which helps on the shady, damp areas many gardens have.
Resin can be shaped into curves and around obstacles more easily than slabs or blocks, so it suits winding garden paths and areas that do not fit a grid. A contrasting border or a second colour can mark out steps, edges and seating areas.
What is included
-
A visit to plan the layout
We look at where the path or patio goes, the levels, any steps and how water leaves the area.
-
Groundwork and base
Digging out to the right depth and laying a base suited to foot traffic.
-
Edging
Edging to hold the resin and give a clean line against lawns and borders.
-
Stone choice
A natural aggregate blend chosen with you, with borders or contrasting bands if you like.
-
Mixing and laying
Resin and stone mixed in batches and trowelled to an even finish.
-
Anti-slip on steps
A fine grit on steps and slopes for extra grip.
What to plan before you book
-
Levels against the house
A patio next to the house should sit below the damp-proof course and fall away from the walls so water does not run towards them.
-
Steps and changes in level
Resin can be laid on steps, but the steps themselves need building first in a solid material.
-
Trees and shade
Leaf fall and shade make any surface greener over time. Plan for a regular sweep under trees.
-
Access for materials
Materials and a mixer need to reach the area, so think about side gates and how we get through to the back garden.
Good to know
-
Resin is not a cure for wet ground
A porous surface drains through to the base, but if the ground underneath stays waterlogged the drainage needs dealing with first.
-
Curves are straightforward
Unlike slabs, resin is laid as a continuous surface, so curved and irregular shapes do not need cutting.
-
Garden furniture
Furniture with narrow metal feet can mark a new surface. Pads under the feet help.
From first message to finished drive
How the job runs
- 1
Your enquiry
Tell us what you have in mind through the form, with a rough size and a photo if possible.
- 2
Site visit
We look at the space, the levels and the access, and bring stone samples.
- 3
Written price
You get a written price for the groundwork, edging and resin.
- 4
Groundwork
We dig out, lay the base and fit the edging.
- 5
Laying
On a dry day we mix and lay the resin and leave it to cure.
- 6
Handover
We clear up and explain how to look after the surface.
Questions people ask
Something else you want to know? Ask it with your enquiry and we'll answer it when we reply.
Can resin be used for a patio?
Yes. A resin bound patio gives a smooth, porous surface that is comfortable for tables and chairs, laid on a base built for foot traffic.
Is a resin path slippery when wet?
Resin bound has a natural stone texture. Where a path slopes or has steps, a fine anti-slip grit can be added to the finish.
Can you lay resin around existing features?
Yes. Resin is laid as one continuous surface, so it can go around trees, manhole covers and planting beds.
Do paths need the same base as driveways?
No. A path or patio carries foot traffic rather than cars, so the base can be lighter, but it still has to be solid and well drained.
Can you match the path to my driveway?
Yes. Using the same stone blend for the drive and paths ties the front of the house together.
Other resin work we do
-
Resin bound driveways A smooth, porous stone finish mixed in resin and trowelled level. Read more -
Resin bonded driveways Loose stone scattered onto a resin coat for a textured, grippy finish. Read more -
Resin over existing surfaces Resin laid over sound tarmac or concrete instead of digging it all out. Read more -
Resin driveway repairs and cleaning Cleaning, patching and putting right resin surfaces that have tired. Read more
Tell us about your surface
Send a few details and a photo if you have one, and we will come back to you to talk it through and give you a price.